Extension Port Module
PRODUCT DETAILS Description ExtPort For Core2 is an expansion module for M5Stack Core2 converting to Grove interface. It provides PortB/C/D/E 4 Grove interfaces, and PortD/E can be configured with different GPIOs via internal dip switches. Note: ExtPort Module has the signature of designer. Before use, please switch one of the 3-pin dip switch to be […]
Maker & Coder Subscriber? Login to get your discount
PRODUCT DETAILS
Description
ExtPort For Core2 is an expansion module for M5Stack Core2 converting to Grove interface. It provides PortB/C/D/E 4 Grove interfaces, and PortD/E can be configured with different GPIOs via internal dip switches.
Note:
- ExtPort Module has the signature of designer.
- Before use, please switch one of the 3-pin dip switch to be ON. Remember that, only one of the dip switch can be set to ON, or it may damage the module.
- If you need to use the Core2 bottom board, you will need to cut off the four support feet of the PROTO module (as shown below), to avoid interference with the bottom board, and use M3 screws to fix.
Product Features
4x Grove interface (PortB/C/D/E)
4x 3-pin dip switches (PortD/E)
1x [email protected] pin head
Included
1x ExtPort For Core2
Application Scenarios
Multi-sensor, multi-actuator extensions
DIY project
Specifications
| Spec | Parameters |
| Expansion ports | PortB, PortC, PortD, PortE |
| Net Weight | 24g |
| Gross Weight | 58g |
| Product Dimensions | 54x54x13mm |
| Package Size | 62x58x17mm |
